KEYANKA  |  RINGANKA  |  CANTIANKA

A removable, single point anchor device to EN795 Class A1 and BS7889 class A1 All components manufactured from grade 316 stainless steel for strength and corrosion resistance. Simple "KEY" action with sprung locking movement provides fast and safe attachment Two separate one-handed movements are necessary to remove the anchor component, making accidental release impossible. Four types of socket are available, manufactured from the same basic component to reduce cost. 180o of rotation of anchor key whilst still attached to the socket. Permanently installed stainless steel anchor socket, having minimal visual impact. White plastic cover provided to blend in with most decors. Separate, removable and transportable anchor point may be used in any socket. Suitable for inistallation into solid brick and concrete, cavity walls and steelwork, with and without fascias.

Ringanka  ^ top ^

Traditional 'Window Cleaner' type safety eyebolts conforming to class 'A1' of EN 795 and BS 7883.  A comprehensive range of anchor bolts and accessories to suit most installations. Safety Eyebolts available in a range of sizes in three standard finishes: galvanised; nylon coated or stainless steel. 100mm for use with knurled inserts in brick, concrete and masonry etc. 152mm where deeper fixing is necessary 75mm for use ONLY in steel structures M12 female threaded knurled inserts are available in lengths of 76mm, 102mm and 150mm to suit varying installation situations. Threaded connectors to extend eyebolts for use as through-bolts (BS7883:1997) Spacer sleeves for thick plaster or voids where distance from the face of the load bearing structure to the collar of the eye bolt does not exceed 25mm Cantilever sockets for voids where distances from the face of the load bearing structure exceeds 25mm CE marked to PPE directive All thread is available for use with threaded couplers PPE Warning discs Polythene sealing washers

Cantianka  ^ top ^

High Strength knurled socket to withstand bending forces in cantilever situations. Cantilever Support for Class 'A1' Anchor Devices to EN795 and BS7883 May be installed in either vertical or horizontal planes.  An optional 'testing bridge' assembly is available when required: If there is cladding etc. Each individual installed anchor device must be subjected to a pull out force of 10kN Registered design number 2086487